DTC C1300: Skid Control ECU Malfunction [08/2013 - ]: Procedure
WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
- REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY
- Replace the skid control ECU (brake booster with master cylinder assembly). Refer to REMOVAL [08/2013 - ] .
- Perform initialization and calibration of the linear solenoid valve. Refer to INITIALIZATION [08/2013 - ] .
- Perform zero point calibration of the yaw rate and acceleration sensor. Refer to CALIBRATION [08/2013 - ] .
- Perform the sensor check in Test Mode Procedure. Refer to TEST MODE PROCEDURE [08/2013 - ] .
NEXT → END