LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> A4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 420 (Electronically Controlled Brake System (Diagnostic Codes & Symptom Tests)) >> Electronically Controlled Brake System >> DTC C1252/52: Brake Booster Pump Motor on Time Abnormally Long; DTC C1253/53: Pump Motor Relay Malfunction [08/2013 - ] >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • When replacing the skid control ECU (brake booster with master cylinder assembly) or brake actuator (brake booster with master cylinder assembly), perform initialization and calibration of the linear solenoid valve. Refer to INITIALIZATION [08/2013 - ] .
  • Inspect the fuses for circuits related to this system before performing the following inspection procedure.