LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> A4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 420 (Electronically Controlled Brake System (Diagnostic Codes & Symptom Tests)) >> Electronically Controlled Brake System >> DTC C1214/62: Hydraulic Control System Malfunction [08/2013 - ] >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

When replacing the brake actuator (brake booster with master cylinder assembly), perform initialization and calibration of the linear solenoid valve. Refer to INITIALIZATION [08/2013 - ] .

HINT: 

When C1364/61 is output together with C1214/62, inspect and repair the trouble areas indicated by C1364/61 first. Refer to DTC C1246/46: Master Cylinder Pressure Sensor Malfunction; DTC C1281/81: Master Cylinder Pressure Sensor Output Malfunction (Test Mode DTC); DTC C1364/61: Wheel Cylinder Pressure Sensor Malfunction [08/2013 - ] .

scientia non olet · About LEMON Manuals