Inspection [08/2013 - ]
WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT REAR SUNSHADE SWITCH (COOLER CONTROL SWITCH ASSEMBLY)
- Check the rear sunshade switch.
- Measure the resistance according to the value(s) in the table below.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard Resistance
Tester Connection Condition Specified Condition 12 - 16 Rear sunshade switch pushed Below 1 Ω 12 - 16 Rear sunshade switch not pushed 10 kΩ or higher TEXT IN ILLUSTRATION*a Component without harness connected
(Rear Sunshade Switch (Cooler Control Switch Assembly))If the result is not as specified, replace the rear sunshade switch (cooler control switch assembly).
- Measure the resistance according to the value(s) in the table below.
- Check the rear sunshade switch.