Inspection [08/2013 - ]
WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT FRONT POWER SEAT SWITCH ASSEMBLY LH
- Measure the resistance according to the value(s) in the table below.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard Resistance
Tester Connection Condition Specified Condition 2 - 3 Hold Below 1 Ω 4 - 5 3 - 4 Off 4 - 5 2 - 5 Release 3 - 4 TEXT IN ILLUSTRATION*1 Release Switch *2 Hold Switch *a Component without harness connected
(Front Power Seat Switch Assembly LH)If the result is not as specified, replace the front power seat switch assembly LH.
- Measure the resistance according to the value(s) in the table below.
- INSPECT FRONT POWER SEAT SWITCH ASSEMBLY RH
- Measure the resistance according to the value(s) in the table below.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard Resistance
Tester Connection Condition Specified Condition 2 - 3 Hold Below 1 Ω 4 - 5 3 - 4 Off 4 - 5 2 - 5 Release 3 - 4 TEXT IN ILLUSTRATION*1 Hold Switch *2 Release Switch *a Component without harness connected
(Front Power Seat Switch Assembly RH)If the result is not as specified, replace the front power seat switch assembly RH.
- Measure the resistance according to the value(s) in the table below.