Installation [08/2013 - ]

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL FUEL SENDER GAUGE ASSEMBLY
1. Install the fuel sender gauge assembly by sliding it downward.
  
  Fig 1: Installing Fuel Sender Gauge Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the connector of the fuel sender gauge assembly.
3. Install the wire harness protector.
  NOTE:
  Do not damage the wire harness.
4. Connect the 3 wire harness clamps.
  NOTE:
  Do not damage the wire harness.
INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY
Refer to INSTALLATION [08/2013 - ]