LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> A4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 380 (Engine Control System (Diagnostic Codes (P0300-P148F))) >> SFI System >> DTC P0606: ECM / PCM Processor [08/2013 - ] >> Typical Enabling Conditions

Typical Enabling Conditions

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
Monitor runs whenever the following DTCs are not stored None
All of the following conditions are met -
Auxiliary battery voltage 8 V or higher
Power switch On (IG)
Time after power switch off to on (IG) More than 0.5 seconds