Typical Enabling Conditions
WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
| Monitor runs whenever the following DTCs are not stored | None |
| Time after engine started | 3 seconds or more |
| Time after engine fuel cut | 2300 msec or more |
| Engine speed | 950 to 1600 rpm |
| Vehicle speed | 20 km/h (12.5 mph) or more |
| Engine coolant temperature | 75°C (167°F) or higher |
| Auxiliary battery voltage | 11 V or higher |
| Intake air temperature | -10°C (14°F) or higher |
| Atmospheric pressure | 76 kPa(abs) [750 mmHg(abs)] or higher |