LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> A4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 356 (Blind Spot Monitor System (Diagnostics) (Introduction)) >> Blind Spot Monitor System >> Terminals Of Ecu [08/2013 - ] >> Terminals Of Ecu [08/2013 - ]

Terminals Of Ecu [08/2013 - ]

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
  1. BLIND SPOT MONITOR SENSOR LH (MASTER) 
    Fig 1: Blind Spot Monitor Sensor LH (Master) Terminal Identification
    GTY414104Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    Terminal No.
    (Symbol)
    Wiring Color Terminal Description Condition Specified Condition
    U8-3 (BIND) - U8-10 (BLGD) B - W-B Blind spot monitor indicator power source signal Power switch on (IG), blind spot monitor main switch (warning canceling switch assembly) on 11 to 14 V
    Power switch on (IG), blind spot monitor main switch (warning canceling switch assembly) off Below 1 V
    U8-4 (OMIL) - U8-10 (BLGD) V - W-B Outer rear view mirror indicator power source signal LH Outer rear view mirror indicator LH illuminated 2.5 to 7.5 V
    Outer rear view mirror indicator LH blinks Alternating between 0 to 7.5 V
    Outer rear view mirror indicator LH not illuminated Below 1 V
    U8-5 (BLB) - U8-10 (BLGD) L - W-B IG power source signal Power switch off Below 1 V
    Power switch on (IG) 11 to 14 V
    U8-8 (BSSW) - U8-10 (BLGD) P - W-B Blind spot monitor main switch (warning canceling switch assembly) power source signal Power switch on (IG), blind spot monitor main switch (warning canceling switch assembly) on 11 to 14 V
    Power switch on (IG), blind spot monitor main switch (warning canceling switch assembly) off Below 1 V
    U8-10 (BLGD) - Body Ground W-B - Body ground Ground Always Below 1 V
  2. BLIND SPOT MONITOR SENSOR RH (SLAVE) 
    Fig 2: Blind Spot Monitor Sensor RH (Slave) Terminal Identification
    GTY414108Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    Terminal No.
    (Symbol)
    Wiring Color Terminal Description Condition Specified Condition
    U9-3 (BUZ) - U9-10 (BRGD)*1 GR - W-B Rear cross traffic alert buzzer (blind spot monitor buzzer) operation signal Rear cross traffic alert buzzer (blind spot monitor buzzer) not sounding 11 to 14 V
    Rear cross traffic alert buzzer (blind spot monitor buzzer) sounding Alternating between 0 to 14 V
    U9-4 (OMIR) - U9-10 (BRGD) G - W-B Outer rear view mirror indicator power source signal RH Outer rear view mirror indicator RH illuminated 2.5 to 7.5 V
    Outer rear view mirror indicator RH blinks Alternating between 0 to 7.5 V
    Outer rear view mirror indicator RH not illuminated Below 1 V
    U9-5 (BRB) - U9-10 (BRGD) V - W-B IG power source signal Power switch off Below 1 V
    Power switch on (IG) 11 to 14 V
    U9-10 (BRGD) - Body Ground W-B - Body ground Ground Always Below 1 V
    • *1: w/ Rear Cross Traffic Alert Function