Sill panel cover, removing and installing: Notes

WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Sill Panel Cover Remove/Install Components

Courtesy of VOLKSWAGEN UNITED STATES, INC.

1 - Bracket for sill panel cover

Removing and installing Removing bracket for sill panel cover

2 - Bolt

1 Nm

3 - Bolt

2 Nm

4 - Sill panel cover

Removing:
Then pull out of rear cover in - direction of arrow - and remove.
Installing:
Insert sill panel cover into rear cover.

Then secure to bracket - 1 - Removing bracket for sill panel cover .
Screw in bolts - 3 -.
Screw in bolts - 2 -.

5 - Cover strip

6 - Rear sill panel cover

Removing and installing Rear sill panel cover

7 - Bolt

2 Nm

8 - Bolt

1 Nm

9 - Wheelhousing liner