Inspection [08/2013 - ]
WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT FRONT SEAT INNER BELT ASSEMBLY LH
- Measure the resistance according to the value(s) in the table below.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard Resistance
Tester Connection Condition Specified Condition 1 - 2 Driver seat belt unfastened Below 1 Ω 1 - 2 Driver seat belt fastened 10 kΩ or higher TEXT IN ILLUSTRATION*a Component without harness connected
(Front Seat Inner Belt Assembly LH)If the result is not as specified, replace the front seat inner belt assembly LH.
- Measure the resistance according to the value(s) in the table below.
- INSPECT FRONT SEAT INNER BELT ASSEMBLY RH
- Measure the resistance according to the value(s) in the table below.
Standard Resistance
Tester Connection Condition Specified Condition 2 - 3* Front passenger seat belt unfastened Below 1 Ω 2 - 3* Front passenger seat belt fastened 10 kΩ or higher 1 - 2 Front passenger seat belt unfastened 10 kΩ or higher 1 - 2 Front passenger seat belt fastened Below 1 Ω - *: w/o Occupant Classification System
TEXT IN ILLUSTRATION*a Component without harness connected
(Front Seat Inner Belt Assembly RH)If the result is not as specified, replace the front seat inner belt assembly RH.
- Measure the resistance according to the value(s) in the table below.