Removal [08/2013 - ]

WARNING: This page is about a different car, the 2014 Lexus ES 300h. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE FRONT SEAT ASSEMBLY LH
Refer to REMOVAL [08/2013 - ]

REMOVE SEAT POSITION AIRBAG SENSOR

Disconnect the connector.

Fig 1: Identifying "TORX" Bolt & Seat Position Airbag Sensor

TEXT IN ILLUSTRATION

	"TORX" Bolt
	Connector

Using a T30 "TORX" socket wrench, remove the "TORX" bolt and seat position airbag sensor with the seat slide position sensor protector.
Remove the seat position airbag sensor from the seat slide position sensor protector as shown in the illustration.

Fig 2: Removing Seat Position Sensor From Protector
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002