Installing input shaft oil seal
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2007 Audi S4, 2007 Audi RS 4, and 2006 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
- Lightly lubricate outer circumference of seal with gear oil.
- Press in oil seal for input shaft as far as it will go.
- The open side of seal faces towards press tool VW 454.
- Pack space between sealing lip and dust lip half-full with sealing grease G 052 128 A1 .