LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2015 >> A4 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (6-Speed Manual Transmission 01X, Front-Wheel Drive) >> 34 Controls, housing >> Bearing housing, servicing >> Bearing housing, servicing >> Pressing front ball sleeve into reverse gear selector rod until limit stop

Pressing front ball sleeve into reverse gear selector rod until limit stop

WARNING: This page is about a different car, the 2008 Audi A4, 2007 Audi A4, 2006 Audi A4, and 2005 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Pressing Front Ball Sleeve Into Reverse Gear Selector Rod Until Limit Stop
GW00019018Courtesy of VOLKSWAGEN UNITED STATES, INC.

Install ball sleeve - arrow  - so that side with lettering (thicker metal) faces guide pin 10 - 15.

scientia non olet · About LEMON Manuals