Driving in seal for flanged shaft

WARNING: This page is about a different car, the 2005 Audi A4, 2004 Audi A4, 2003 Audi A4, and 2002 Audi A4. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Driving In Flange Shaft Seal

GW00005760

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Insertion depth: 5.5 mm

NOTE:

Figure shows installing seal on right-hand side of transmission.
The procedure is identical for left and right-hand seals.
Insertion depth for repairs is 6.5 mm when a used flanged shaft is employed.