Overview - Instrument Panel
- Bolt
- 1.5 Nm
- Quantity: 3
- Light Switch -E1-
- Removing and Installing. Refer to Rotary Light Switch -EX1-, REMOVING AND INSTALLING .
- Headlamp Range Control Adjuster -E102-
- Removing and Installing. Refer to Headlamp Range Control Adjuster -E102-, REMOVING AND INSTALLING .
- Bolt
- 3 Nm
- Quantity: 6
- Frame
- For instrument cluster
- Removing and installing. Refer to INSTRUMENT CLUSTER FRAME, REMOVING AND INSTALLING .
- Left Side Instrument Panel Vent
- From MY 2012, refer to Fig 2
- Removing and installing. Refer to INSTRUMENT PANEL VENT, REMOVING AND INSTALLING, SIDE INSTRUMENT PANEL VENT .
- Bolt
- 3 Nm
- Quantity: 2
- Bolt
- 3 Nm
- Quantity: 2
- Nut
- 0.5 Nm
- Quantity: 6NOTE:
Tighten the bolts carefully to prevent the mounting pins on the speaker trim from shearing off.
- Mount
- For speaker
- Removing and installing. Refer to SPEAKER MOUNT, REMOVING AND INSTALLING .
- Mid-range Speaker
- Equipment levels
- Removing and installing. Refer to REAR MIDRANGE SPEAKER, REMOVING AND INSTALLING .
- Side Speaker Trim
- Equipment levels
- Removing and installing. Refer to SPEAKER TRIM, REMOVING AND INSTALLING, SIDE SPEAKER TRIM .
- Nut
- 0.5 Nm
- Quantity: 6NOTE:
Tighten the nuts carefully to prevent the screws on the defroster vent from shearing off.
- Sunlight Photo Sensor -G107-
- Removing and installing. Refer to Sunlight Photo Sensor -G107-, REMOVING AND INSTALLING .
- Center Speaker Trim
- Equipment levels
- Removing and installing. Refer to SPEAKER TRIM, REMOVING AND INSTALLING, CENTER SPEAKER .
- Upper Center Defroster Vent
- Removing and installing. Refer to FRONT CENTER DEFROSTER VENT, REMOVING AND INSTALLING .
- Mid-range Speaker
- Equipment levels
- Removing and installing. Refer to REAR MIDRANGE SPEAKER, REMOVING AND INSTALLING .
- Upper Side Defroster Vent
- Bolt
- 3 Nm
- Quantity: 2
- Instrument PanelWARNING:
- Follow all Safety Precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Follow the allocation of the airbag to the instrument panel.
- Removing and installing. Refer to INSTRUMENT PANEL, REMOVING AND INSTALLING .
- Right Side Instrument Panel Vent
- Removing and installing. Refer to INSTRUMENT PANEL VENT, REMOVING AND INSTALLING, SIDE INSTRUMENT PANEL VENT .
- Front Passenger AirbagWARNING:
- Follow all Safety Precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Follow the allocation of the airbag to the instrument panel.
- Overview. Refer to OVERVIEW - FRONT PASSENGER AIRBAG .
- Locking and activating possible with key switch
- Trim Molding
- Removing and installing. Refer to INSTRUMENT PANEL DECORATIVE TRIM, REMOVING AND INSTALLING .
- Nut
- Tightening specification. Refer to OVERVIEW - FRONT PASSENGER AIRBAG .
- Bolt
- 3 Nm
- MMI Screen
- Removing and Installing. Refer to Front Information Display Control Head Control Module -J523-, REMOVING AND INSTALLING, MMI BASIC .
- Cover
- for MMI screen
- From MY 12, refer to Fig 2
- Removing and installing:
- Center Instrument Panel Vent
- Removing and installing. Refer to INSTRUMENT PANEL VENT, REMOVING AND INSTALLING, CENTER INSTRUMENT PANEL VENT .
- Radio/Navigation System
- Equipment levels
- Removing and installing. Refer to INFOTAINMENT COMPONENT LOCATION OVERVIEW, BASIC/BASIC PLUS NAVIGATION .
- Installation Frame, Removing and Installing RADIO/NAVIGATION SYSTEM FRAME, REMOVING AND INSTALLING
- Front Information Display Control Head Module -J523-
- Removing and installing. Refer to FRONT INFORMATION DISPLAY CONTROL HEAD CONTROL MODULE, REMOVING AND INSTALLING
- Bolt
- 2 Nm
- Climatronic Control Module -J255-
- Removing and installing. Refer to DISPLAY AND CONTROL HEAD, REMOVING AND INSTALLING .
- Bolt
- 3 Nm
- Bolt
- 3 Nm
- Trim
- For Access/Start Authorization Switch -E415-
- Removing and installing. Refer to ACCESS/START AUTHORIZATION SWITCH TRIM, REMOVING AND INSTALLING .
- Access/Start Authorization Switch -E415-
- Removing and Installing. Refer to Access/Start Authorization Switch -E415-, REMOVING AND INSTALLING .
- Instrument Cluster
- Removing and installing. Refer to INSTRUMENT CLUSTER .
- Light Switch Trim
- Removing and installing. Refer to LIGHT SWITCH TRIM, REMOVING AND INSTALLING .
- Clips - quantity: 6
- Left side instrument panel vent - removing and installing, refer to REMOVING ->From MY 2012:
- Emergency Flasher Button -E229- with Front Passenger Airbag -Disabled- Indicator Lamp -K145-, Removing and Installing. Refer to Emergency Flasher Button -E229-, REMOVING AND INSTALLING .
- MMI Screen Cover, Removing and Installing, refer to MMI SCREEN COVER, REMOVING AND INSTALLING, FROM MY 2012