Glove Compartment Lamp Switch -E26-, REMOVING AND INSTALLING: Removing

-- Turn off the ignition and remove the key.

-- Disengage the Fuse Panel D -SD- from the right side of the instrument panel and slide it to the side. Refer to Fuse Panel D -SD- WITH RIGHT INSTRUMENT PANEL FUSE CARRIER, REMOVING AND INSTALLING .

-- Disconnect the connector -3-.

Fig 1: Releasing Glove Compartment Lamp Switch

Courtesy of AUDI OF AMERICA, LLC

-- Remove the hinge bolts -1-.

-- Release the switch -2- counterclockwise -arrow- and remove.