Gear Set, Removing And Installing: Notes
WARNING: This page is about a different car, the 2018 Audi A6, 2017 Audi A6, and 2016 Audi A6. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Press Tool :T40323
- Assembly Tool :T40305
- Slide Hammer Set :VW771
- Gearbox Assembly Tool :T40213/1/2/3
- Retaining Strap :T40155
- Shop Crane :VAS6100
- Puller - Grease Cap :VW637/2
- Wiring Harness Repair Set - Hot Air Blower :VAS1978/14A
- Engine/Gearbox Support Shackle (2 pc.) :10-222A/12
CAUTION:
This Procedure Contains Mandatory Replaceable Parts. Refer To Component Overview And Parts Information Prior To Starting Procedure.
Mandatory Replacement Parts
- Seal - Transmission housing to transmission
- Seal - Transmission housing
- Bolt - Transmission housing to transmission
- Bolt - Transmission housing
- Circlip - Transmission housing
- Cap - Transmission housing
- Bolt - Gear positioner to transmission
- Seal - Oil pan
- Bolt - Oil pan
- Seal - Hydraulic pressure reservoir
- Bolt - Hydraulic pressure reservoir
CAUTION:
Risk Of Damaging The Transmission By Mixing ATF And Transmission Fluid (MTF) Through The Same Bleeder.
- The ATF and transmission fluid must be drained.