Flange Shaft Protective Ring, Replacing

Special tools and workshop equipment required 

• Press Plate VW401
• Press Plate VW402
• Press Piece - Multiple Use VW412
• Bearing Installer - Differential Bearing 40-21
• Seal Installer - Flywheel Oil Seal Kit - Press Sleeve 2003/1 from the Seal Installer - Flywheel Oil Seal Kit 2003
• Bearing Installer - Wheel Bearing 3345
• Separating Tool - 22-115mm, such as Puller - Kukko Quick Action Separating Tool - 22-115mm 17/2

Fig 1: Identifying Ring -A- To Flange Shaft, Removal

Courtesy of AUDI OF AMERICA, LLC

B -

Separating Tool - 22-115mm, such as Puller - Kukko Quick Action Separating Tool - 22-115mm 17/2

Fig 2: Carefully Install Ring -A- Onto Flange Shaft

Courtesy of AUDI OF AMERICA, LLC

• Protective ring installation location -A- : The larger outer diameter on the protective ring faces the Bearing Installer - Wheel Bearing 3345.