Codes, Transmission Allocations, Ratios And Capacities (AUDI A5 Coupe From My 2008)

CAUTION:

Gear oil and ATF change Audi RS5

The RS5 gear oil and ATF must be changed.
RS5 change interval. Refer to the 03 MAINTENANCE, DIAGNOSIS .
For all other vehicles there is no change interval.

Rear Final Drive			0BF
Codes			LFU	LFV	LFW
Ratio		Final drive Z₂ : Z₁	35 : 9 = 3.889	37 : 9 = 4.111	43 : 13 = 3.308
Driveshaft flange diameter			75.5 mm	75.5 mm	75.5 mm
Gear oil - capacity For rear final drive (differential and pinion) No change interval except RS5 RS5 change interval. Refer to the 03 MAINTENANCE, DIAGNOSIS .			Refer To The Appropriate Fluid Capacity Table.
ATF capacity For the hydraulic control unit and chambers No change interval except RS5 RS5 change interval. Refer to the 03 MAINTENANCE, DIAGNOSIS Maintenance Tables.			Refer To The Appropriate Fluid Capacity Table.

Rear Final Drive			0BF
Codes			LGH	LGJ	MBV
Ratio		Final drive Z₂ : Z₁	37 : 10 = 3.700	35 : 8 = 4.375	35 : 9 = 3.889
Driveshaft flange diameter			75.5 mm	75.5 mm	75.5 mm
Gear oil - capacity For rear final drive (differential and pinion) No change interval except RS5 RS5 change interval. Refer to the 03 MAINTENANCE, DIAGNOSIS Maintenance Tables.			Refer To The Appropriate Fluid Capacity Table.
ATF capacity For the hydraulic control unit and chambers No change interval except RS5 RS5 change interval. Refer to the 03 MAINTENANCE, DIAGNOSIS Maintenance Tables.			Refer To The Appropriate Fluid Capacity Table.

Rear Final Drive			0BF
Codes			MBW	MKV	MKW
Ratio		Final drive Z₂ : Z₁	37 : 10 = 3.700	43 : 13 = 3.308	35 : 8 = 4.375
Driveshaft flange diameter			75.5 mm	75.5 mm	75.5 mm
Gear oil - capacity For rear final drive (differential and pinion) No change interval except RS5 RS5 change interval. Refer to the 03 MAINTENANCE, DIAGNOSIS .			Refer To The Appropriate Fluid Capacity Table.
ATF capacity For the hydraulic control unit and chambers No change interval except RS5 RS5 change interval. Refer to the 03 MAINTENANCE, DIAGNOSIS .			Refer To The Appropriate Fluid Capacity Table.

Rear Final Drive			0BF
Codes			MKX	MKY
Ratio		Final drive Z₂ : Z₁	35 : 9 = 3.889	37 : 10 = 3.700
Driveshaft flange diameter			75.5 mm	75.5 mm
Gear oil - capacity For rear final drive (differential and pinion) No change interval except RS5 RS5 change interval. Refer to the 03 MAINTENANCE, DIAGNOSIS .			Refer To The Appropriate Fluid Capacity Table.
ATF capacity For the hydraulic control unit and chambers No change interval except RS5 RS5 change interval. Refer to the 03 MAINTENANCE, DIAGNOSIS .			Refer To The Appropriate Fluid Capacity Table.