Overview - Rear Final Drive, AUDI A4, A5 Coup E /SPORTBACK/Cabriolet, A6, A7

Fig 1: Rear Final Drive Overview

Courtesy of AUDI OF AMERICA, LLC

1. Subframe
   • Removing and installing. Refer to SUBFRAME .
2. Bolt
   • 95 Nm
3. Bolt
   • 55 Nm
4. Left Drives Axle
   • Removing and installing. Refer to DRIVE AXLE, REMOVING AND INSTALLING .
5. Bolt
   • 20 Nm
6. Heat Shield
7. Rear Final Drive
   • Removing and installing. Refer to REAR FINAL DRIVE, REMOVING AND INSTALLING, AUDI A4, A5 COUP E /SPORTBACK/CABRIOLET, A6, A7 .
   • Additional work after replacing the rear final drive. Refer to REAR FINAL DRIVE, ADDITIONAL WORK AFTER REPLACING .
8. Driveshaft
   • Removing and installing. Refer to DRIVESHAFT BOLTED ON TRANSMISSION SIDE, REMOVING AND INSTALLING .
9. Right Drive Axle
   • Removing and installing. Refer to DRIVE AXLE, REMOVING AND INSTALLING .