Rear Wheel Housing Liner, Removing And Installing: Removing

Fig 1: Removing/Installing Rear Wheel Housing Liner

Courtesy of AUDI OF AMERICA, LLC

• The rear wheel is removed.

-- Remove the nuts -3- and bolts -5-.

-- Remove the expanding clips -1, 4-.

-- Remove the clips -2- from the wheel housing liner.

-- To remove the clips -3-, unlock the release lever -2- with needle nose pliers in direction of -arrow A- and push it off the pin -1- in direction of -arrow B-.

-- Remove the wheel housing liner.

Fig 2: Identifying Clips -3-, Release Lever -2- And Pin -1-

Courtesy of AUDI OF AMERICA, LLC