Dimensions - Rear Lid Name Badges And Emblems, AVANT

Rear Lid, Avant

Fig 1: Placing Name Badges And Emblems On Rear Lid (Avant, 1 Of 3)

Courtesy of AUDI OF AMERICA, LLC

NOTE:

The dimension -c- is measured from the lower edge of the engine displacement emblem to the upper edge of the allroad; quattro or ultra badge.

The dimension -e- is measured from the lower edge of the badge to the upper edge of the allroad badge.

Fig 2: Placing Name Badges And Emblems On Rear Lid (Avant, 2 Of 3)

Courtesy of AUDI OF AMERICA, LLC

NOTE:

The dimension -c- is measured from the lower edge of the badge to the upper edge of the quattro or ultra badge.

The dimension -e- is measured from the lower edge of the badge to the upper edge of the allroad badge.

Market-Specific

Fig 3: Placing Name Badges And Emblems On Rear Lid (Avant, 3 Of 3)

Courtesy of AUDI OF AMERICA, LLC

NOTE:

The dimension -c- is measured from the lower edge of the badge to the upper edge of the allroad or quattro badge.