LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> allroad Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 1 (2.0L - Ignition/Glow Plug System - Engine Code(S): CPMA & CPMB) >> 28 Ignition/Glow Plug System >> Ignition System >> Camshaft Position Sensor, Removing And Installing >> Installing

Camshaft Position Sensor, Removing And Installing: Installing

WARNING: This page is about a different car, the 2013 Audi allroad. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the O-ring.

-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals