Cylinder Head, Removing And Installing, Engine With Wrench Clearance: Notes
NOTE:
Camshafts with wrench clearance have notches in the camshafts. Refer to Figure.
Special tools and workshop equipment required
- Central Valve Assembly Tool T10352
- Counterhold - Vibration Damper T10355
- Locking Pin (3 pc.) T40011
- Chain Tensioner Lever T40243
- Tensioner Locking Tool T40267
- Camshaft Locks T40271
- Engine Bung Set VAS6122
- Polydrive Bit Drive Socket T10070
- Socket - Xzn 12 T40270
- Camshaft Pins T40196
NOTE:
You can use T10070 or T40270 depending on the bolt.