Camshaft Timing Chain, Removing And Installing: Installing

Fig 1: Camshaft Timing Chain Overview

Courtesy of AUDI OF AMERICA, LLC

NOTE:

The painted links of the timing chain must be positioned on the markings on the chain sprockets.

-- Mount the timing chain on the intake camshaft.

-- Mount the timing chain on the exhaust camshaft.

-- Lay the timing chain on the crankshaft and hold it there.

-- Install the camshaft timing chain guide rail and tighten the bolts -1-.

Fig 2: Identifying Camshaft Timing Chain Components

Courtesy of AUDI OF AMERICA, LLC

-- Install the upper glide track -arrow-.

Fig 3: Identifying Upper Guide Track

Courtesy of AUDI OF AMERICA, LLC

-- Turn the exhaust camshaft in direction of -arrow 1-, slide the Camshaft Locks T40271/1 out of the chain sprocket splines in direction of -arrow 2- and release the camshaft.

Fig 4: Turn Exhaust Camshaft

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Camshaft Locks - Component 1 T40271/1.

-- Install the timing chain tensioning rail and tighten the bolt -2-.

Fig 5: Identifying Camshaft Timing Chain Components

Courtesy of AUDI OF AMERICA, LLC

-- Turn the intake camshaft in direction of -arrow 1-, slide the Camshaft Locks - Component 2 T40271/2 out of the chain sprocket splines in direction of -arrow 2- and release the camshaft.

Fig 6: Turn Intake Camshaft

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Camshaft Lock - Component 2 T40271/2.

-- Check that the position of the colored chain link is aligned to the markings.

Fig 7: Camshaft Timing Chain Overview

Courtesy of AUDI OF AMERICA, LLC

-- Install the drive chain for the oil pump and the chain tensioner. Tighten the bolt -1- and remove the Locking Pin (3 pc.) T40011.

Fig 8: Identifying Oil Pump Chain Tensioner And Locking Pin T40011

Courtesy of AUDI OF AMERICA, LLC

-- Install the bolts -arrows- and tighten them.

Fig 9: Identifying Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Mount the bearing bracket and the bolts -arrows- hand-tight.

Fig 10: Bearing Bracket Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Depending on the version, remove either the Locking Pin (3 pc.) T40011 or the Tensioner Locking Tool T40267.

-- Tighten the bolts -arrows-. Refer to OVERVIEW - CAMSHAFT TIMING CHAINS .

-- Install the control valve. Refer to -item 6- Control Valve (See Figure).

Assemble in reverse order of disassembly. Note the following:

-- Install the lower timing chain cover. Refer to LOWER TIMING CHAIN COVER, REPLACING .

-- Install the upper timing chain cover. Refer to UPPER TIMING CHAIN COVER, REMOVING AND INSTALLING .

-- Reset the service position. Refer to SERVICE POSITION, PERFORMING AND RESETTING .