LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> allroad Prestige >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Mechanical Components (As Of 09.2011) >> 46 Mechanical Components >> Removal And Installation >> Rear Brakes >> Rear Brake Shield >> Installing

Rear Brake Shield: Installing

-- Position the brake shield.

-- Install the bolts on the brake shield and tighten them.

-- Install the rear brake disc, refer to REAR BRAKE DISC .

-- Install the brake hose and electrical wire into the bracket on the stub axle carrier.

NOTE:

Make sure the brake hose is correctly installed and secured inside the bracket on the stub axle carrier. So that the brake hose does not come out of the bracket on its own.

-- Install wheels.

Wheel bolt tightening specifications, refer to WHEEL BOLTS, TIGHTENING .

-- Lower vehicle.

scientia non olet · About LEMON Manuals