Front Brake Disc, FBC-57: Removing
WARNING:
The 4 retaining pins for the brake pads on the brake carrier must not be loosened under any circumstances.
-- Raise the vehicle.
-- Remove the wheels.
-- Remove the front brake pads, refer to FRONT BRAKE PADS, FBC-57 .
NOTE:
Do not let the brake caliper hang from the brake hose. Secure it to the body with suitable cable ties or wire. Do not support the weight with the brake hose.
-- Remove the bolts -3- on the front brake carrier.
CAUTION:
Never remove bolts -6 and 9-
-- Remove the front brake carrier.
-- Remove the securing bolt -arrow- on the brake disc while holding the disc firmly.
-- Remove the brake rotor.
NOTE:
When removing the brake rotor from the wheel hub, do not tilt the disc.