LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> allroad Prestige >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brake System - Mechanical Components (As Of 01.2014) >> 46 Mechanical Components >> Front Brakes >> Brake Caliper, Removing And Installing >> Brake Caliper, Removing And Installing, 1LM >> Installing

Brake Caliper, Removing And Installing, 1LM: Installing

NOTE:

Replace the bolts -13-.

Fig 1: Overview Of Front Brakes Components (1LM)
GWWA46-10160Courtesy of AUDI OF AMERICA, LLC

-- Carefully press the brake caliper with brake pads installed over the brake rotor.

-- Tighten the brake caliper with new bolts -13-.

-- Place the brake hose into the bracket.

-- Install the wheels.

Wheel bolt tightening specification. Refer to WHEEL BOLT TIGHTENING SPECIFICATIONS .

-- Lower vehicle.

CAUTION:

After the first drive, depress brake pedal firmly several times with vehicle stationary so that the brake pads are properly seated in their normal operating position.

CAUTION:

Make sure the brakes are working correctly before driving the vehicle for the first time.

scientia non olet · About LEMON Manuals