Fuel Filler Door, Removing And Installing

Remove the Fuel Filler Door, Refer to "Remove the Fuel Filler Door  " (See Fig 1).

Fuel Filler Door, Installation Position, Refer to "Fuel Filler Door, Installation Position  " (See Fig 3).

Fuel Filler Door Drain Hose, Refer to "Fuel Filler Door Drain Hose  " (See Fig 4).

Remove the Fuel Filler Door 

-- Open the fuel filler door and unlock it at the markings -arrows-.

-- To do this, insert a small screwdriver diagonally from underneath through the marking in the tank flap over the latches.

-- Gently lift the screwdriver and release the latches.

-- At the same time, remove the fuel filler door from the opening a little bit at a time.

Fuel Filler Door, Installation Position 

1. Side Panel
2. Fuel Filler Door Cover
   • Adjust distance -A- = 2.2 mm evenly to the side panel.
3. Fuel Filler Door Cup
   • Slide all around onto body flange as shown.
4. Drain Hose
   • Route it without kinking it.

Fuel Filler Door Drain Hose 

1. Drain Hose

   -- Route the drain hose as shown under the wheel housing liner and insert it in the guide piece.

2. Fuel Filler Door
3. Wheel Housing Liner
   • Loosen in the area of the drain hose and press it to the side.
4. Rear Bumper
5. Rear Guide Piece
   • Drain hose inserted in the lower guide piece as shown.