Special Tools

Special tools and workshop equipment required 

• Front and Rear Door Template VAS038/8

  Courtesy of AUDI OF AMERICA, LLC

• Window Slot Seal Tool VAS219, quantity: 3

  Courtesy of AUDI OF AMERICA, LLC

• Gauge - Gap Adjustment 3371

  Courtesy of AUDI OF AMERICA, LLC

• The >>min and max<< markings are used to check the lateral adjustment.
• The recess in the center of the template is used for checking the height.
• The 0.4 mm graduation is used for checking the recess of the front door to the fender, or of the rear door to the front door.
• The 0.6 mm graduation is used to check the recess of the trim on the >>B-pillar<< from the rear door to the front door.
• Adhesive Strip Remover VAS6349

  Courtesy of AUDI OF AMERICA, LLC

• Pry Lever 80-200

  Courtesy of AUDI OF AMERICA, LLC

• Roller 3356

  Courtesy of AUDI OF AMERICA, LLC