Overview - Impact Absorber, Vehicles Through My 2012

Courtesy of AUDI OF AMERICA, LLC

1. Impact Member
   • Removing and installing. Refer to IMPACT ABSORBER, REMOVING AND INSTALLING, VEHICLES THROUGH MY 2012 .
2. Low Tone Horn -H7-
   • Removing and Installing. Refer to High Tone Horn -H2- /Low Tone Horn -H7-, REMOVING AND INSTALLING .
3. Right Spacer
   • For the bumper cover
4. Right Impact Bar Bracket
   • Removing and installing. Refer to MOUNT FOR IMPACT BRACKET, REMOVING AND INSTALLING, VEHICLES THROUGH MY 2012 .
5. High Tone Horn -H2-
   • Removing and Installing. Refer to High Tone Horn -H2- /Low Tone Horn -H7-, REMOVING AND INSTALLING .
6. Bolt
   • 30 Nm
7. Left Spacer
   • For the bumper cover
8. Bolt
   • 4 Nm
   • Secures the lock carrier.
9. Bolt
   • 30 Nm
10. Left Impact Bar Bracket
    • Removing and installing. Refer to MOUNT FOR IMPACT BRACKET, REMOVING AND INSTALLING, VEHICLES THROUGH MY 2012 .
11. Bolt
    • 20 Nm
12. Nut
    • Tightening specification. Refer to [For engine(s) CPMB, CPMA] Horn .