Impact Member Bracket, Removing And Installing, Vehicles From My 2013: Removing
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Remove the side impact bar. Refer to IMPACT ABSORBER, REMOVING AND INSTALLING, VEHICLES FROM MY 2013 .
-- Remove the headlamp housing mount. Refer to HEADLAMP, REMOVING AND INSTALLING, HID HEADLAMPS (FROM MY 2013) .
-- Mark the installation position of the mount to the lock carrier for installation later.
-- Remove the bolts -arrows-.
-- Remove the nut -1-.
-- Tip the impact member mount -2- on the lock carrier out and remove it.