Bumper Cover, Removing And Installing, AUDI RS 4: Removing

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .

-- Remove the bolts -arrows-.

-- Remove the front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -arrow-.

-- Remove the lock carrier cover. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .

-- Disconnect the connector -1- for the front parking aid sensor.

-- In equipped, remove the Garage Door Opener Control Module - J530- -item 2-. Refer to GARAGE DOOR OPENER CONTROL MODULE, REMOVING AND INSTALLING .

-- Remove the bolts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Disengage the side walls on the front side panel and remove the bumper cover forward.