Oil Pressure, Checking
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Oil Pressure Gauge V.A.G 1342
Procedure
- Oil level OK
- Engine oil temperature approximately 80 °C (176 °F).
-- Remove oil pressure switch. Refer to Oil Pressure Switch -F1- .
-- Install the oil pressure switch in the V.A.G 1342.
-- Install the V.A.G 1342 in the hole for the oil pressure switch in the oil filter bracket.
-- Start the engine.
- Oil pressure at idle at least 1.2 bar.
- Oil pressure at 2000 RPM at least 2.7 bar.
-- Install oil pressure switch, refer to Oil Pressure Switch -F1- .