Camshaft, Measuring Axial Play

Special tools and workshop equipment required 

• Dial Gauge Holder VW 387
• Dial Gauge 0-10 mm VAS 6079

Procedure 

-- Remove the guide frame. Refer to CAMSHAFTS .

-- Place camshaft to be checked in guide frame.

-- Secure the VAS 6079 to cylinder head with the VW 387.

-- Press camshaft against dial gauge by hand.

Fig 1: Identifying Dial Gauge VAS 6079 Secured To Cylinder Head With Universal Dial Gauge Holder VW 387

Courtesy of AUDI OF AMERICA, LLC

-- Set dial gauge to "0".

-- Press camshaft off dial gauge and read the value:

• Axial clearance: 0.05 to 0.17 mm.