Fastener Tightening Specifications
WARNING: This page is about a different variant/trim than selected.
| Components | Bolt Size | Nm |
|---|---|---|
| Bolts/nuts | M6 | 10 |
| M7 | 15 | |
| M8 | 22 | |
| M10 | 40 | |
| M12 | 65 | |
| Exceptions: | ||
| Ground (GND) Wire | - | 22 |
| Bracket to Body | - | 20 + 90° |
| Bracket to Engine Mount | - | 20 + 90° |
| Engine Mount to Body | - | 40 + 90° |
| Engine Mount to Engine Support | - | 60 + 90° |
| Engine Support to Engine | - | 45 |
|
||
Mounting, S-Tronic Transmission to Engine
| Item | Bolt | Nm |
|---|---|---|
| 1, 3 | M12x55 | 80 |
| 5 | M12x65 | 80 |
| 6 | M12x50 | 80 |
| 7, 8 | M10x50 | 40 |
| 9 | M12x70 | 80 |
| 10 | M12x55 | 80 |
| 2, 4 | Starter mounting, refer to [For transmission(s) 02E] Removal and Installation | |
| A | Alignment sleeves for centering | |