LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 72 (2.0L - Engine Assembly - Engine Code(S): CDMA (Roadster)) >> 10 Engine Assembly >> Description And Operation >> Engine And Transmission Mounts Overview

Engine And Transmission Mounts Overview

WARNING: This page is about a different variant/trim than selected.
Fig 1: Engine And Transmission Mounts Overview
GWWA10-10681Courtesy of AUDI OF AMERICA, LLC
  1. Bolt
    • Transmission support to transmission
    • Tightening specifications, refer to Specifications
  2. Bolts
    • Pendulum supports to transmission
    • Different lengths
    • Tightening specifications, refer to Specifications
  3. Engine Support
    • With support arm
    • Illustration does not correspond to version in vehicle
  4. Bolt
    • 45 Nm
    • Different lengths
    • Engine support to engine
  5. Engine Mount
    • With support arm
  6. Bolt
    • Replace
    • 40 Nm plus an additional 90° turn
    • Engine mount to body
  7. Bracket
  8. Bolt
    • Replace
    • 20 Nm plus an additional 90° turn
    • Bracket to engine mount
  9. Bolt
    • Replace
    • 20 Nm plus an additional 90° turn
    • Bracket to body
  10. Bolt
    • Replace
    • 40 Nm plus an additional 90° turn
    • Engine mount to body
  11. Bolts
    • Replace
    • 60 Nm plus an additional 90° turn
    • Engine mount to engine support
  12. Pendulum Support
  13. Bolt
    • Pendulum supports to subframe
    • Tightening specifications, refer to Specifications
  14. Bolt
    • Transmission mount to transmission support
    • Tightening specifications, refer to Specifications
  15. Bolt
    • Transmission mount to body
    • Tightening specifications, refer to Specifications
  16. Transmission Mount
    • With support arm
    • The S-Tronic transmission is shown in the illustration
  17. Bolt
    • Transmission support to transmission
    • Tightening specifications, refer to Specifications
  18. Bolt
    • Transmission support to transmission
    • Tightening specifications, refer to Specifications
  19. Transmission Support