Needle Bearing On Crankshaft

Special tools and workshop equipment required 

• Drift VW 207 C
• Puller T10055 with Adapter T10055/3
• Kukko 21/2 Internal Puller

Procedure 

• Transmission removed.

-- Remove needle bearing with Kukko 21/1 internal puller -arrow-, T10055/3 and T10055.

Fig 1: Identifying Standard Extractor E.G. Kukko 21/2, Adapter T10055/3 And Puller T10055

Courtesy of AUDI OF AMERICA, LLC

-- Drive in needle bearing using the VW 207 C.

Fig 2: Driving In Needle Bearing Using Drift VW 207 C

Courtesy of AUDI OF AMERICA, LLC

• Depth: -a- = 2 mm.
  Fig 3: Identifying Installation Depth Dimension

  Courtesy of AUDI OF AMERICA, LLC