LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 67 (2.0L - Cooling System - Engine Code(S): CDMA (Roadster)) >> 19 Cooling System >> Removal And Installation >> Fan Shroud

Fan Shroud

WARNING: This page is about a different variant/trim than selected.

Removing 

-- Remove the bolts -arrows- and air guide.

Fig 1: Identifying Bolts -Arrows- And Air Guide
GWWA10-10602Courtesy of AUDI OF AMERICA, LLC
WARNING:

Risk of injury from coolant fan starting by itself.

  • Disconnect electrical connectors before working on fan shroud.

-- Disconnect the connector -1-.

Fig 2: Coolant Fan Control (FC) Control Module J293
GWWA19-0473Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the fan shroud upward.

Installing 

Install in reverse order of removal.