Coolant Hose Connection Diagram
WARNING: This page is about a different variant/trim than selected.
WARNING:
Risk of scalding due to hot steam and hot coolant.
- The coolant system is under pressure when the engine is warm.
- Reduce pressure by covering coolant reservoir cap with a cloth and carefully open.
NOTE:
Arrows on coolant pipes and ends of coolant hoses must align when installing.
- Radiator
- Change coolant after replacing
- After-Run Coolant Pump -V51-
- Coolant Thermostat with Housing
- Coolant Pump
- Cylinder Head and Cylinder Block
- Change coolant after replacing
- Turbocharger
- Coolant Reservoir
- With cover and pressure relief valve
- Pressure relief valve, checking COOLING SYSTEM, CHECKING FOR LEAKS
- Heater Core
- Change coolant after replacing
- Coolant Connection
- Oil Cooler
- Change coolant after replacing
- Intake Manifold