LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Gears, Shafts - Manual Transmission 02Q AWD (Roadster)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Output Shaft, 1ST To 4TH Gears >> Pressing On Synchronizer Hub With Locking Collar For 3RD And 4TH Gears

Pressing On Synchronizer Hub With Locking Collar For 3RD And 4TH Gears

WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Tool Assembly To Press On 3rd And 4th Gear Synchro-Hub With Locking Collar
GWWN35-0248Courtesy of AUDI OF AMERICA, LLC

-- Then install circlip.

scientia non olet · About LEMON Manuals