Installed Position Of Outer Race, Inner Race And Synchronizer Ring, 2ND Gear
WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Modified 1st Gear Synchronization Components (From Transmission Build Date 02 05 0)
-- Place inner race -A- on the 2 gear wheel.
- The bent tabs -arrow 1- face toward outer race -B-.
-- Install outer race -B-.
- The tabs -arrows 2- engage in the gear wheel grooves -arrows 3-.
-- Install synchronizer ring -C-.
- The grooves -arrows 4- engage in the tabs -arrows 1- of the inner race -A-.