Disassembling And Assembling Locking Collar And Synchronizer Hub For 1ST And 2ND Gears As Well As 3RD And 4TH Gears
WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Disassembling And Assembling 1St And 2Nd As Well As 3Rd And 4Th Gear Locking Collar And Synchro-Hub
-- Remove the springs to disassemble -1-.
- Spring
- Locking piece
- Locking collar
- Synchronizer hub
-- To assemble, slide locking collar over the synchronizer hub.
- In 3rd and 4th gear, the wide collar on the synchronizer hub and the locking collar face in one direction.
- Installed position: the narrow recesses in the synchronizer hub align with the recesses in the locking collar.