Pulling Out Tapered Roller Bearing Outer Race

WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Support/Puller/Extractor Assembly To Remove Tapered Roller Bearing Outer Race

Courtesy of AUDI OF AMERICA, LLC

A - Support, for example Kukko 22/2

B - Internal puller 46...58 mm, for example Kukko 21/7

NOTE:

After pulling off, check the adjustment shim for damage and replace if necessary.