Pulling Off Inner Race For Tapered Roller Bearing

WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Tool Assembly To Remove Inner Race/Tapered Roller Bearing

Courtesy of AUDI OF AMERICA, LLC

-- Remove circlip.

-- Before attaching extractor, place VW 431 and 40 - 105 on output shaft.

Fig 1: Identifying Tool Assembly To Remove Inner Race/Tapered Roller Bearing

Courtesy of AUDI OF AMERICA, LLC

-- Before installing puller, set 30 - 11 onto output shaft.