LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2014 >> TT Quattro Base, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Gears, Shafts - Manual Transmission 02Q AWD (Roadster)) >> 35 Gears, Shafts >> Disassembly And Assembly >> Output Shaft For 5TH/6TH Gear And Reverse Gear >> Pressing On Locking Collar/Synchronizer Hub For 5TH And 6TH Gears

Pressing On Locking Collar/Synchronizer Hub For 5TH And 6TH Gears

WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Tools To Install 5th And 5th Gear Locking Collar/Synchro-Hub
GWWN35-0265Courtesy of AUDI OF AMERICA, LLC

-- Then install circlip.

scientia non olet · About LEMON Manuals