Disassembling And Assembling Locking Collar And Synchronizer Hub For 5TH And 6TH Gears
WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Disassembling And Assembling 1St And 2Nd As Well As 3Rd And 4Th Gear Locking Collar And Synchro-Hub
-- Remove the springs to disassemble -1-.
- Spring
- Locking piece
- Locking collar
- Synchronizer hub
-- To assemble, slide locking collar over the synchronizer hub.
- Installation position: The narrow locking piece recesses in the synchronizer hub align with the recesses in the locking collar.