Checking Synchronizer Ring For 5TH And 6TH Gears For Wear
WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of AUDI OF AMERICA, LLC
-- Press synchronizer ring onto taper of the gear wheel and measure gap dimension -a- using a feeler gauge.
| Gap Dimension -a - |
Installed Dimension |
Wear Limit |
| 5th and 6th gear |
1.0 to 1.7 mm |
05 mm |