Assembling Locking Collar/Synchronizer Hub For 5TH And 6TH Gears
WARNING: This page is about a different car, the 2009 Audi TT and 2008 Audi TT. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Assembling 1St And 2Nd As Well As 3Rd And 4Th Gear Locking Collar/Synchro-Hub
Courtesy of AUDI OF AMERICA, LLC
The locking collar is pushed over the synchronizer hub.
-- Insert locking pieces and install the springs 120° offset.
Spring must engage with angled end into hollow engaging piece.